青海附近想过夜电话联系

Welcome to Shandong Rugong Machinery Manufacturing Co., Ltd!

Add to collection | Website map

 Shandong Rugong Machinery Manufacturing Co., Ltd

National hotline:

400-996-7888

Current location: Home page >> news information

The manufacturer of the air heater will answer the after-sale questions about the installation and use of the air heater in the industrial workshop

Author: Shandong Rugong Machinery Manufacturing Co., Ltd     Release time: August 19, 2020

Industrial workshop air heater is mainly used in workshops, workshops and other industrial places. It is mainly used for heating and heating some workshops that need to maintain a certain temperature, and can also be used to dry some industrial products. Workshop air heater is a combined unit composed of motor and radiator, which is used to heat air. It is suitable for all kinds of workshops where air recycling is allowed. When the air does not contain dust and flammable gas, it can be used as circulating air heating.

Heating methods are various: floor heating, radiation, warm air, convection and so on. In all kinds of heating machine, the air heating is more comfortable. Workshop air heater can provide clean and dry hot air to make the whole space heating temperature uniform.

The cold air in the pipe system and heat pipe must be drained before the air heater in the industrial workshop runs.

The hot water temperature of workshop air heater is generally above 85 ℃ and can not be lower than 80 ℃. The water flow rate in the cooling pipe must be 0. It can only be used if it is more than 2 m / s. In order to control the air flow in the air heater system, the air heater should be installed in the air heater to control the air flow.

Maintenance of air heater in industrial workshop:

The air heater should be washed with compressed air and water regularly. After working for 2-3 years, chemical methods should be used to remove the scale in the exhaust pipe. The hot water of the air heater in the workshop should be softened to reduce the scale. The pipeline system should be filled with water to reduce the corrosion when the heater is not in use. In order to make the workshop temperature field uniform and maintain a certain section speed, the jet of the air heater should be connected with each other to form a general air circulation in the heating room; at the same time, the circulation times of indoor air should not be less than 1.5 times per hour.

Layout scheme of air heater in industrial workshop:

1. Direct blowing arrangement: the workshop air heater is arranged on one side of the inner wall, and the hot air emitted is parallel to the short axis of the room or in the direction of the external window, so as to reduce the penetration of cold air.

2. Inclined blowing arrangement: the air heater in the workshop is arranged along the longitudinal axis in the middle of the room to blow the air to the outer wall obliquely. This kind of arrangement is used in the situation where the air heater can be arranged along the longitudinal axis of the room.

3. Forward blowing arrangement: if the air heater in the workshop cannot be arranged on the longitudinal axis of the room, the air heater can be connected in series along the four walls to avoid the interference of airflow and make the indoor air temperature more uniform.


Recommended products
  • 30kW electric heater
  • 9kw factory electric heater
  • 70kw factory heater (oil fired heater)
  • 5kW electric hot air blower
contact us

Hotline: 400-996-7888

Address: No.6 Hongguang Road, Jining high tech Zone, Shandong Province